This article is written like a personal reflection, personal essay, or argumentative essay that states a Wikipedia editor's personal feelings or presents an original argument about a topic. (November 2010)
This article needs additional citations for verification. (April 2011)
Indoor household gas heaters can be broadly categorized in one of two ways: flued or non-flued, or vented and unvented.
The first gas heater made use of the same principles of the Bunsen burner invented in the previous year. It was first commercialized by the English company Pettit and Smith in 1856. The flame heats the air locally. This heated air then spreads by convection, thus heating the whole room. Today the same principle applies with outdoor patio heaters or "mushroom heaters" which act as giant Bunsen burners.
Beginning in 1881 the burner's flame was used to heat a structure made of asbestos, a design patented by Sigismund Leoni, a British engineer. Later, fire clay replaced the asbestos because it is easier to mould. Modern gas heaters still work this way although using other refractory material.
Modern gas heaters have been further developed to include units which utilize radiant heat technology, rather than the principles of the Bunsen burner. This form of technology does not spread via convection, but rather, is absorbed by people and objects in its path. This form of heating is particularly useful for outdoor heating, where it is more economical than heating air that is free to move away.
Flued heaters would always be permanently installed. The flue, if properly installed with correct overall height, should extract most heater emissions. A correctly operating flued gas heater is usually safe.
Non-flued heaters – also known as unvented heaters, ventfree heaters or flueless fires may be either permanently installed or portable, and sometimes incorporate a catalytic converter. Non-flued heaters can be risky if appropriate safety procedures are not followed. There must be adequate ventilation, they must be kept clean, and they should always be switched off before sleeping. If operating correctly the main emissions of a non-flued gas heater are water vapour and carbon dioxide and nitrogen dioxide.
Home gas heating controls cycle using a mechanical or electronic thermostat. Gas flow is actuated with a valve. Ignition is by electric filament or pilot light. Flames heat a radiator in the air duct but outside the flue, convection or a fan may distribute the heat.  
- Flueless gas fires
- "Air duct cleaning guide". Wednesday, 15 May 2019